UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 2964

m1.x ngdbuild. ERROR basut - Problem parsing '_'.

説明

keywords: ngdbuild, basut, parsing, _

Urgency: Standard

Gneral Description: when ngdbuild tries to run edif2ngd on an edn
file of an abel macro, it will give an error if pins (in or out) begin
with an _

ERROR: basut - Problem parsing '_'. On or above line ## in file
C:/active/projects/blah/blah.edn. contact the vendor of the
program that produced this EDIF file.

ソリューション

1

remove the _ from the beginning of the pin name in the abel
code and update the macro. (in foundation). this may require
you to then go in and use the symbol editor to put the pins
back to match up with the rest of the schematic.

2

In the newer ABEL compiler (beginning with Foundation 1.5),
the EDIF netlist writer automatically drops the leading "_" from
the signal names. A warning is produced in the log file
(abl2edif.log) for each changed name.
AR# 2964
作成日 08/31/2007
最終更新日 10/06/2008
ステータス アーカイブ
タイプ 一般