UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 311

5.0 PPR - Error 9062: Global Buffer Driven by IO, IBUF

ソリューション




PPR reports:
*** PPR: ERROR 9062:
The global buffer '$1I3' (type=BUFGP, output signal=$1N18) is driven
by I/O '$1I2' (type=IBUF, connected to pad '$1N22_pad'). The BUFGP
input must be routed through a dedicated path that does NOT pass
through the normal input buffer. Routing this signal through an IBUF
would incur significant routing delay and would require an additional
IOB.

WHY THIS HAPPENS

To make users aware of the fact that primary global buffers require the
use of an IO pin, situations where a BUFGP is fed from a non-IPAD symbol
gererate warnings and/or errors. When internal logic drives a BUFGP, PPR
gives warning 9010. When a BUFGP is fed from an IBUF, warning 9010 and
error 9062 (shown above) are generated.

WHAT TO DO:

As the message states, either add a LOC to the IPAD, or remove the IBUF.

AR# 311
作成日 08/31/2007
最終更新日 03/22/2000
ステータス アーカイブ
タイプ ??????