We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 31229

10.1 EDK - BSB-generated designs for Spartan-3-1600E board do not work


When BSB is used to create a design with 100 Mhz clock frequency, the system does not work after BSB completes.


Although a 100 MHz clock is defined in the XBD file, Base System Builder does not connect the clock to the SMA connector. To work around this issue, the user should connect a clock signal to the SMA connector.

AR# 31229
日付 05/21/2014
ステータス アーカイブ
種類 一般