UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 3126

M1.4 CPLD Hitop - A fitter crash may result from properties applied to wrong objects

説明

Keywords: crash, fitter, properties, attribute, collapse, init,
keep, noreduce, pwr_mode, wireand

Urgency: standard

General Description:
The CPLD fitter may crash due to design properties being assigned
to the wrong type of objects.

ソリューション

If the CPLD fitter program hitop crashes, check to see if there is
any I/O buffer, pad or pad-net in your design that has a property
attached to it that is intended only for macrocell-type objects.

The macrocell-only type properties are COLLAPSE, INIT, KEEP,
NOREDUCE, PWR_MODE and WIREAND. Using any of these properties on
an I/O object should normally produce an error or warning message.

Remove any such properties from the I/O objects and attach them to
the applicable macrocell objects (logic or flip-flop components),
and rerun the fitter.
AR# 3126
作成日 08/31/2007
最終更新日 10/06/2008
ステータス アーカイブ
タイプ 一般