We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!


AR# 3127

M1.4 CPLD Hitop - Excessive run time or Bus Error problems with the fitter


Keywords: run time, bus error, fitter

Urgency: Standard

General Description:
How to resolve the Excessive Run-time or Bus Errors caused by the
CPLD Fitter?



If the CPLD fitter program hitop runs for too long (over an hour)
or if it terminates with a bus error, you may be able to get
results more quickly by turning on the new Multi-level Logic
Optimization option for the fitter.

To do this in the Flow Engine, go to Setup -> Options. Click on
the Edit Template button in the Options dialog. Go to the Advanced
Optimization section and select the checkbox marked Multi-Level
Logic Optimization.


You can also do it using the -mlopt option for the CPLD script (for Solaris).
AR# 3127
日付 03/29/2000
ステータス アーカイブ
種類 一般