We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 32761

LogiCORE Ethernet 1000BASE-X PCS/PMA or SGMII v10.2 - Release Notes and Known Issues for ISE 11.2


This Answer Record contains the Release Notes for the LogiCORE Ethernet 1000BASE-X PCS/PMA or SGMII v10.2 Core, which was released in the ISE 11.2 and includes the following:  


- New Features  

- Resolved Issues  

- Known Issues 


For installation instructions, general CORE Generator known issues, and design tools requirements, see the IP Release Notes Guide: 


For Frequently Asked Questions see: 

(Xilinx Answer 33595) LogiCORE Ethernet 1000BASE-X PCS/PMA or SGMII - Frequently asked questions (FAQ)


New Features 


- ISE 11.2 software support 

- Spartan-6 support 

- Virtex-6 support 


Resolved Issues 


- None 


Known Issues 


- Virtex-6 and Spartan-6 solutions are pending hardware validation. 


-Software Support for the Virtex-6 Lower Power parts was added in this release, but the 1000BASE-X PCS/PMA or SGMII Core does not yet support these devices and cannot be generated from CORE Generator targeting Virtex-6 Lower Power. Pending further testing, support for Virtex-6 Lower Power parts is planned for 11.3. To work around this issue, you can set your project to target an equivalent Virtex-6 LXT device, which will allow you to generate the IP. 


- Timing simulation not currently supported when targeting Spartan-6. 


- The TBI interface is currently not supported for Spartan-6 and will fail during BitGen.  


(Xilinx Answer 33108) LogiCORE Ethernet 1000BASE-X PCS/PMA or SGMII v10.2 - Timing failures seen for some Spartan-3 SGMII TBI implementations  


(Xilinx Answer 33109) LogiCORE Ethernet 1000BASE-X PCS/PMA or SGMII v10.2 - MAP Place errors seen in some Spartan-6 Implementations

AR# 32761
日付 05/21/2014
ステータス アーカイブ
種類 一般