After installation, the Dynatext Browser and Online Documentation are not available from the program group.
The Dynatext browser is not installed by default with the Foundation Base Packages. To install this, you must specify it in the installation procedure. Run the setup/install program from the Foundation Series Design Implementation Tools CDROM. Follow the InstallShield instructions until you get to the screen which says: "Select Software Components to Install."
* Highlight the "Online Documentation (17 sub-components)" which is the last selection. * Click on the "Change" button. This will bring up a screen "Select Sub-components." Be sure that "Documentation Browser" is checked. Also, check any of the Online Books which you want installed to your PC harddrive. * Click "Continue" and continue the installation as usual.
Note: If you do not wish to re-install all of the Foundation Software, you may de-select everything except the Online Documentation option in the "Select Software Components to Install" window.