UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

このページをブックマークに追加

AR# 3463

M1.4 PAR - PAR hangs when using a PCF to LOC single component hard macros (.nmc's).

説明

PAR hangs during placement on designs with .pcf location
constraints on single component hard macros (.nmc's) that
contain no routing information. A patch is available for
M1.4.

ソリューション

A fix for this PAR error is included in the current M1.4 Core
Applications patch available from the Xilinx Download Area:

Solaris: http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_sol17_m14.tar.Z
SunOS http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_sun17_m14.tar.Z
HPUX: http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_hp17_m14.tar.Z
Win95/NT: http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_nt17.zip

AR# 3463
日付 10/20/2008
ステータス アーカイブ
種類 一般