We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!


AR# 3514

Packaging - Will the heat sink on the bottom of the HQ240 (or smaller packages such as HQ160) short signals on the board?


General Description:

The HQ240 and smaller packages have a heat sink on the bottom of the part that, when mounted, will face the PCB. Some customers have expressed concern that the heat sink will create a short between signal traces on the board.


On the HQ240 and smaller packages, the heat sink on the bottom of the die is insulated. Because of this there is no need for an external patch to achieve insulation.

Please see the following for more information:

AR# 3514
日付 05/14/2014
ステータス アーカイブ
種類 一般
  • Virtex-E
  • Virtex-E QPro
  • Virtex
  • More
  • Virtex QPro/R
  • 4000E/EX/XL QPro/R
  • 4000/E/XL/XV
  • Less