We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 3804

*Obsolete* M1.X JTAG Programmer: Clicking icon makes hourglass appear, then goes away


Keywords: Jtag programmer, Lab install, Jtag, Nothing, goes away, hour glass, basut.acd.

Urgency: Standard

General Description:
Clicking the JTAG Programmer icon makes an hourglass icon appear for a few seconds, but the hourglass goes away and no GUI is launched. Also, if the jtagprog command-line program is run, an error message similar to the following occurs:

"Cannot find basut.acd"

These errors tend to come with the lab install.



Check the XILINX environment variable. It is likely not pointing to the proper directory. Following is an example of what it should be:

XILINX c:\fndtn


Make sure that the temporary variables are pointing to a valid location.
An example would be:

TEMP c:\temp

TMP c:\temp

Verify that c:\temp exists and that there is disk space available on that drive.
AR# 3804
日付 09/26/2005
ステータス アーカイブ
タイプ ??????