UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 3873

2.1i COREGEN, WORDPAD: "The document xxxx is in use by another application and cannot be accessed." / The CORE Generator does not release its "lock" on an XCO file

説明

Keywords: Coregen, document, edit, access, use

Urgency: Standard.

General Description:
The CORE Generator does not release its "lock" on an XCO file
after executing it.

The problem may be observed if you follow this sequence of steps:

1. Edit an XCO file and deliberately create a bad entry
in it using Wordpad. Save the edits, leaving Wordpad open.

2. Next run "Execute Command File" on the hand-modified XCO
file to see what errors are reported. With Wordpad still open,
modify the XCO to correct the problem and try to save the
modifications.

Wordpad issues the following message:

"The document xxxx is in use by another application and cannot be
accessed."

ソリューション

The problem is seen with some of the more commonly used PC-based editors,
but does not appear to be a problem with less often used editors like Visual Cafe.

To edit and save the file, quit out of the CORE Generator and your editor, then
reopen the XCO, make the edits and save them.
AR# 3873
作成日 05/07/1998
最終更新日 08/29/2001
ステータス アーカイブ
タイプ 一般