UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 3939

M1.4 Map - WARNING:baspl:291 - The IOB component "io<0>" could not be placed.

説明

Keywords: IOB, Component, placed, lack, resource, preference, conflict, baspl

Urgency: Standard

General Description:

A problem has been seen running par on high density devices
(4085xl and 40125xv) where if all of the I/O's available are
being used, PAR is unable to successfully place all the I/O.
PAR fails with the Warning:

WARNING:baspl:291 - The IOB component "io<0>" could not be placed.
ERROR:baspl:292 - This is probably due either to lack of resources
or to preference conflicts. If PAR has been run, please check the
.par file for resource allocation and utilization and verify that
there are sufficient resources to place the component(s). Also
ensure that all placement conflicts have been resolved.

A work around is to lock down the pins in pcf or ucf file.

ソリューション

This issue is being investigated. Meanwhile a work around is
to lock down the pins that are having the problem.

The syntax for ucf file is as follows:
NET mynet LOC = P12;
AR# 3939
作成日 08/31/2007
最終更新日 10/21/2008
ステータス アーカイブ
タイプ 一般