We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 4007

HW-130/Third party programmers (such as DATA IO, BP): Supported file formats .mcs, .exo, .tek but not .bit


Urgency: Standard

Description: Customer wanted to know what file format was accepted in

his third party programmer.


There are three file formats that the hw-130/third party programmers


.mcs (Intel hex format)

.exo (Motorola hex format)

.tek (Tektronix hex file format)

You must use the prom file formatter software tool. This is available in the

xilinx software tools, and can convert the .bit file to one of these hex file formats which will be accepted by the programmer. You can access the prom

file formatter through the design manager gui. The gui is accessed by an

icon on the on the left hand side in the design manager.

Note: The .hex file format is not accepted by the hw-130, but is

accepted by some of the third party programmers.

AR# 4007
作成日 08/21/2007
最終更新日 12/15/2012
ステータス アクティブ
タイプ 一般