UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 4074

M1.4 PAR - DRC incorrectly posts warning about DPRAM D1 pin when it is unused.

説明

WARNING:x4edr:21 - Blockcheck: CLB "U8_uart_ctl_i_txfifo_out<28>"
is configured to use the G LUT as RAM, but the D1 and WE lines
use the same pin, which will likely cause a D->WE setup violation.

The SR mux is driving WE. The same signal drives the H-LUT thru
the H1 mux. Because the H1 mux also drives D1, drc warns about
the setup violation. This is an incorrect warning because the
DPRAM configuration does not use D1.

ソリューション

This problem has been fixed for the M1.5 release. Meanwhile the
incorrect warning message can be safely ignored in M1.4 by
running bitgen with the -d option to disable drc.
AR# 4074
作成日 08/31/2007
最終更新日 10/21/2008
ステータス アーカイブ
タイプ 一般