We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 4098

2.1i NGD2VER: Using the -ism to embed simulation models into the Verilog simulation netlist


Keywords: -ism, ngd2ver, simprim, libraries, verilog

Urgency: Standard

General Description:
A new switch was added to the Alliance 1.5 version of NGD2VER,
the Verilog simulation netlister, in order to automatically embed the
simulation models into the netlist. This will allow for an easier
simulation flow by not having to pre-compile the SIMPRIM libraries
at the expense of a slightly longer compilation time of the netlist.


This new switch is the -ism switch. In order to invoke this from
command-line, simply specify it when executing Ngd2ver:

ngd2ver -ism <design>.nga

In order to use this switch with the Design Manager, the switch
must be added to the Custom Template from the Template Manager.
See (Xilinx Solution 1227) for details on adding custom switches to
the Design Manager.
AR# 4098
日付 07/31/2001
ステータス アーカイブ
種類 ??????