We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 4143

Orcad Simulate: Simulation error message: [Load085] entity 'xxxx' not found


Keywords: Express, Simulate, CIS, Windows, Orcad

Urgency: Standard

General description: During simulation, I get the error message:
[Load085] entity 'xxxx' not found.

OrCAD has provided three scenarios that might give you this error
message. For further information please check the OrCAD web site
at http://www.orcad.com



Scenario 1

You get the error message: "[Load085] entity 'xxxx' not found" for
all your I/O pads (for example, you get the error message on an
IPAD you had renamed "CLOCKIN").

In order for the compiler to find the corresponding entity
declaration, all parts must retain their vendor-specified value.
The compiler matches part values with VHDL entity declarations. A
mismatch can occur if, for example, you rename an IPAD something
like "CLOCKIN." The compiler library has no entity called CLOCKIN,
but it does have an entity called IPAD, and can match that part

If you want to rename a part, you can place text by the part, or
create a user-defined, visible property with another name in the
property Value field.


Scenario 2

You have a design that contains custom parts and have transferred
the design to Express, but when you try to compile it, it fails
and generates the error message: "[Load085] entity 'xxxx' not found"
for every custom part in the design.

The error message displays because you are missing required compiler
library files. Every part in your design needs a corresponding
compiler .STL library file declaration. This is a VHDL entity
declaration describing the portmap (pinout) of the part. OrCAD
provides those declarations for all parts supplied with the product,
but you must provide them for any custom parts you use. The .STL
file is a text file of VHDL code. Use it as a format guide in
creating a custom entity statement.

Also, when you simulate your design, you need a VHDL simulation
model for every part. This file describes the behavioral
architecture of the part. OrCAD provides simulation models for all
supplied parts, but you must create one for any custom part. You
can use the .VHD simulation model files we provide as examples of
simulation model formats. The Esperan VHDL tutorial provided with
Express, along with the online VHDL Style Guide and online VHDL
Reference, are other resources you can use in the creation of
custom models. You can access these documents on the Help menu in


Scenario 3

You receive the error message: "[Load085] component 'AND1' not
found," yet your design doesn't include any AND1 components, and
there is no AND1 symbol in the simulation or synthesis libraries.
However, when you check the VHDL netlist, it references three
AND1 symbols.

It's likely that your project is missing some library files. In
Simulate, you must specifically load simulation model libraries
and, therefore, you must be sure to load all the simulation
libraries for the specific vendor and family you're using in your

For Express, this error typically occurs when you have created a
blank project from the project wizard, and added the synthesis
and simulation libraries yourself.

The error may also occur in Express if you created a project in
a particular family (using the project wizard) and then added
components from another family to the design.

Normally, if you create your Express project with the project
wizard, Express adds all the necessary library files to your
project automatically.

Many vendors require two sets of simulation and synthesis
libraries for each family: one that models primitives and another
that models macros. These models reside in library files with
names that end in "_p" and "_m," respectively. Be sure to add
the appropriate library files to the project for all the
component families used in the design.

Also, although your design may not specifically use a particular
component (in this case, AND1) it may still use macros that
reference that component. A specific example is the Xilinx AND3
macro, which references the AND1 component. When you attempt to
compile or simulate your design, the simulator or compiler can
locate the macro, but not the primitive components within the
macro, indicating that a library is missing from the project.

AR# 4143
日付 10/06/2008
ステータス アーカイブ
タイプ 一般