We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 426

XABEL 5.0, XC7000 EPLD: Trouble accessing D1 and D2 alu pins


There is no support for the D1 and D2 inputs of an XC7000 EPLD in
XABEL 5.0. Customers wishing to explicity constrain a signal to the
D1 or D2 inputs of an EPLD high density function block must either
use PLUSASM, or define a PLUSASM PROPERTY in XABEL. However, equations
defined by PLUSASM PROPERTY are not recognized by the XABEL compiler.
Consequently they are not simulatable and can cause errors if used in
conjunction with normal XABEL equations.

AR# 426
日付 01/15/2003
ステータス アーカイブ
種類 一般