UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!
  1. ザイリンクス - Adaptable. Intelligent.
  2. サポート
  3. AR# 4312: A1.4/F1.4 Lca2ncd - Re-entrant par of lca2ncd'd design leave partially configured route-thrus behind.

AR# 4312

A1.4/F1.4 Lca2ncd - Re-entrant par of lca2ncd'd design leave partially configured route-thrus behind.

説明


Cases have been seen where re-entrant routing of .ncd's created
by lca2ncd results in DRC errors. PAR will rip-up and re-route a
net that had a route-thru, find an alternate path, but leave the
CLB route-thru partially configured. The problem was found to be
a problem with the lca2ncd conversion and a patch is now available.

ソリューション

This problem is fixed in the latest M1.4 Core Tools Update
available on the Xilinx Download Area:

Solaris: http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_sol17_m14.tar.Z
SunOS http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_sun17_m14.tar.Z
HPUX: http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_hp17_m14.tar.Z
Win95/NT: http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_nt17.zip
AR# 4312
日付 04/19/2000
ステータス アーカイブ
種類 一般

このウェブサイトを使用することで、cookie の使用を承諾したことになります。   詳細

このページをブックマークに追加