We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 4735

A1.5/F1.5 PAR - MPPR gives reasonable results at first cost table run, but unreasonable results on subsequent cost tables.


When running MPPR (with 4085xl targeted) starting at cost table 2, reasonable timing scores are given. When MPPR moves to cost table 3 and so forth very unreasonable timing scores are given. Also takes forever to run through PAR sequence. This happens in both Unix and NT.

This is a problem with the High Density Placer (XC4085XL and above).



Work around.
Run PAR using only one cost table at a time. A shell script can be
created to run multiple cost tables using the "-t" switch to specify
the cost table for each pass.

This issue is still under investigation so a release date for a fix has
not been scheduled.


A fix for this problem is included in the 1.5i Service Pack 1. For details
on this Service Pack see http://www.xilinx.com/techdocs/5514.htm
AR# 4735
日付 10/05/2008
ステータス アーカイブ
種類 一般