UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 4739

M1.5 Floorplanner - Floorplan window does not display RLOCs

説明

Keywords: M1.5, Floorplanner, Floorplan, RLOC, show, display

Urgency: Standard

General Description:
When a design is opened with M1.5 floorplanner, the Floorplan window does not show RLOCs associated with a RLOC_ORIGIN. (These constraints are improperly applied.)

ソリューション

Follow these steps to resolve this error:

1. Run the design through PAR or Place and Route.
2. Load the Placed and Routed NCD file with the NGD file into Floorplanner.
3. In the placement window select the RPM.
4. Select "Constrain from Placement" from the Floorplan menu.

This will properly build and place the RPM for Floorplaning.


This problem will be resolved in a future software release.
AR# 4739
作成日 08/31/2007
最終更新日 07/09/2001
ステータス アーカイブ
タイプ ??????