We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 4961

M1.5 LOGIBLOX, FOUNDATION - Foundation Documentation on LogiBLOX implies that one can manipulate the pad_loc value of a LogiBLOX pad through the schematic editor.


Keyword: pad_loc, LogiBLOX, schematic editor

Urgency: Standard

General Description;
The help file in Foundation regarding LogiBLOX pads is somewhat misleading; it implies that you
can create a LogiBLOX pad with pad_loc specifications that can then be altered using the
the schematic editor. This is not true.


The only way to specify different pad location ranges on a LogiBLOX PAD module in a schematic
currently is to generate a new LogiBLOX PAD module for each set of location ranges required.

Alternatively, you can use a .ucf file to lock your pins to the desired location.

AR# 4961
日付 02/15/2001
ステータス アーカイブ
種類 ??????