We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!


AR# 515

SYNOPSYS FPGA COMPILER: Problems reading an XNF file back into Synopsys.


Synopsys issues errors when reading in a post place-and-route XNF file. It issues one or
more messages such as:

Error: File 'count8/count8.xnf', Line 54 at or near 'N171': Cannot match this DFF to a
set of pins. Is it specified correctly?. (XNFI-1)


This occurs when you try to read in an XNF file that has been translated from the placed
and routed lca file by LCA2XNF. An XNF file generated by LCA2XNF cannot be read in by Synopsys.

In order to read in a back-annotated XNF in Synopsys, the following
steps must be followed after place and route:

1) LCA2XNF design

2) XNF2VSS design
(This will generate an .vxnf file and attach SCHNM attributes,
which are needed for the Synopsys XNF reader, in the XNF file.)

3) rename the .vxnf to .xnf

4) Read the .xnf output by XNF2VSS into Synopsys.

AR# 515
日付 11/08/2004
ステータス アーカイブ
種類 一般