We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!


AR# 5197

Mentor: Possible solution to RAM not simulating correctly in Quicksim II


Keywords: RAM, Quicksim, Mentor, simulation

Urgency: Standard

General Description:

Doing a Functional or Timing simulation of a RAM using Mentor Quicksim II,
the RAM comes up in a known state, but none of my write operations
appear to be written into the RAM module. Doing a Read on the RAM
shows the contents to be the same as what it powered up as.


Possible solutions:

1) Toggle the //globalsetreset signal at the beginning of the simulation.

2) If it is a timing simulation and the RAM is not coming up in the user
defined initial state (INIT property on RAM), make sure that pld_dve is
run after running pld_edif2tim. Doing this will add the INIT property as
an INSTANCE property for the RAM initialization in the design viewpoint.
AR# 5197
日付 10/05/2008
ステータス アーカイブ
種類 一般