UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 558

Obsolete -- Orcad: SDT2XNF fatal error DS35-SDT-ERROR-008: syntax error in inf file

説明

SDT2xnf can issue the following error message:

INF2XNF: Fatal Error:
---------------------------------------------------
A 'PTG' syntax error was detected at line number '##' of INF file
'<file>.inf'.
'|LINK'

ソリューション

The most common cause of this error is:

1) The schematic contains a set of global XC7000 attributes as text:

|global
|mrinput=on
|preload_opt=off
etc.

2) The schematic also contains a set of LINK statements to other schematics:

|link
|sheet2.sch
|sheet3.sch
etc.

If these sets of text are vertically aligned, even if there are blank lines
in between, the INET program assumes that these sets of text are related, and
writes the INF file accordingly.

SDT2XNF sees an INF file with '|link' as a global XC7000 attribute. Since
this is not a vaild attribute, SDT2XNF issues the syntax error.

Move the sets of text so that they are no longer vertically aligned.
AR# 558
作成日 09/20/1995
最終更新日 04/30/1999
ステータス アーカイブ
タイプ 一般