UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 5788

NGDBuild - "ERROR:based:58 - On or above line 890 in file "repic.edf" occurs when I use a Synplify netlist

説明

Keywords: Synplicity, Synplify, 5200, NGDBuild, EDIF, XNF

Urgency: Standard

General Description:
When I target an XC5200 family using Synplicity 5.0.8 or earlier, the following error occurs in NGDBuild:

"ERROR:based:58 - On or above line 890 in file "repic.edf": Bad portRef "I5" in net "U2_inst_repic_code_slow_flashZ0". This likely means that the EDIF netlist was improperly written. Please contact the vendor of the program that produced this EDIF file."

ソリューション

This happens if Synplify generates an EDIF as a netlist.

To avoid this problem, use XNF instead of EDIF for an XC5000 flow.
AR# 5788
作成日 03/03/1999
最終更新日 11/06/2003
ステータス アーカイブ
タイプ 一般