We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!


AR# 6569

Foundation Schematic 1.5is2- Conv: Netlist [objectname].alb(0):seek 0x##, invalid char 0x0


Keywords : schematic, invalid char, foundation, 0x0

Urgency: standard

Problem Description: When generating a netlist from a schematic sheet, you get an error similar to the following:

Conv: Netlist [objectname].alb(0):seek 0x##, invalid char 0x0

Then, if you proceed to implement the design.


This is usually related to a corrupt macro or schematic sheet. There is no known cause for this corruption of the schematic sheet, but copying the schematic elements to a new sheet and creating a new macro with that new sheet fixes the problem.

The macro to look for will the named by the error message under the
AR# 6569
日付 03/07/2002
ステータス アーカイブ
種類 一般