LogiCORE IP MIPI D-PHY Controller - What is the maximum value of start-up time before High-speed data transfer?
The start-up time is governed by the min (LPX_TIME + HS_PREPARE_TIME + HS_ZERO_TIME) plus CDC flops delay and will vary with the line rate.
Note 1: The value of (a) can be set from the IP wizard. (the default is 50ns)
Note 2: The value of (b)+(c) is stated in the spec (145ns + 10UI) and no control is given to the user for these parameters.
AR# 67249 | |
---|---|
日付 | 06/01/2016 |
ステータス | アクティブ |
種類 | 一般 |
デバイス | |
IP |