UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 681

XEMAKE6 gives the error: hi10:[Warning] Cannot open CTL file <design>.ctl.

説明

Executing XEMAKE6 from the command line starts running TSPREP and then
gives the following error:

hi10:[Warning]Cannot open CTL file <design>.ctl.
Using the default CTL file hitop.ctl.
hi11:[Error]Cannot open the default CTL file hitop.ctl.

ソリューション

XEMAKE6 is designed to be run under the Design Manager in Windows. The
Design Manager creates the <design>.ctl file containing all user options (e.g.
device name, optimization settings) which is then read by the XEPLD programs.

XEMAKE6 cannot be run from a DOS prompt.

Use the previous version of XEMAKE (v5.1) when running from DOS.
AR# 681
作成日 08/31/2007
最終更新日 10/01/2008
ステータス アーカイブ
タイプ 一般