UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 6887

7.1i CPLD Pin2UCF - What does "B:" or "S:" indicate in my UCF file?

説明

General Description:  

What does "B:" or "S:" represent in the following lines from a UCF file?  

 

NET "input1" LOC = "S: PIN3";  

NET "input2" LOC = "B: PIN4"; 

 

This was generated by the Xilinx design tools when I performed a "Lock Device Pins" process. 

 

The usual syntax is: 

NET "input1" LOC = P3; 

 

I cannot find a reference to "S: PINnn" or "B: PINnn" (where nn stands for number) in the Libraries Guide.

ソリューション

These two options are generated by Pin2UCF for Xilinx CPLD families only. 

 

"S:" is used before the pin locks to ensure that the CPLD fitter optimizes feedback the same way each time, and provides consistent timing results after subsequent re-fits.  

 

"B:" is used before the pin locks to indicate that this signal is buffered and should remain so to ensure successful fitting for subsequent implementations.

AR# 6887
作成日 08/21/2007
最終更新日 05/14/2014
ステータス アーカイブ
タイプ 一般