General Description : When installing on Win NT, user will get an error message after pressing return to create the folder for the start button. The error message will state that an unexpected error has occurred, please call Xilinx Technical Support.
Another symptom is if the setup.log (or .0, .1, etc) is read, the last part of the log will mention 'snippet 700'.
This has been seen in several computers that have Win NT pre installed. The workaround is to put a 'path' in the 'User Variable's System properties.
1. Go to Start=>Settings=>Control Panel 2. Double click on 'System' 3. Select the 'Environment' tab 4. Clock once inside the 'User Variables' window. 5. Make sure nothing is selected in this window. 6. Type in PATH for the variable (make sure this not the path in the 'System Variables') 7. Type in %PATH% for the value 8. Press the 'Set' button. 9. Press the 'OK' button
Now try to reinstall the software. If you are still having problems, look in the $TEMP directory. There should be a file called setup.log (or setup.0, setup.1 etc.). Please send the exact error message and the latest (largest number) setup file to your nearest Xilinx Support Center.