We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!


AR# 7580

XPLA Programmer - Message "Driver vicprt11 not found" appears when software finds the parts on the board.


Keywords: XPLA, PC-ISP, programmer, ISP, ISC, JTAG, CoolRunner,
error, message, warning, vicprt11, driver, board

Urgency: Standard

General Description:
Even though the software finds the parts on the board, the message "Driver vicprt11 not
found" appears. What does this mean?


1. Verify that the software was correctly installed. Make sure the XPLA
Programmer was installed into a 8-(or fewer)character directory
structure. Do not use spaces.

2. Verify that parallel port configuration (BIOS parallel port setting) is
set to EPP ECP. You may also need to verify that this is set properly
in the Windows Control Panel.
AR# 7580
日付 08/22/2002
ステータス アーカイブ
種類 一般