UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 7593

XPLA Architecture - JTAG pins with internal weak pull-up/down resistors

説明

Do the JTAG pins have a weak pull-up/pull-down resistor when these pins are reserved for this function?

ソリューション

The weak pull-up/pull-down is not enabled when the JTAG function is implemented. The I/Os are simply 3-stated; therefore, it is advisable to implement a weak pull-up/pull-down resistor in your design. This will prevent the JTAG inputs from floating, which eliminates the chance that the CoolRunner would draw higher currents from the power supply.  

 

NOTE: The other 3-stated I/Os, by default, retain their weak pull-up/pull-down implementation as allowed by the features of that part.

AR# 7593
作成日 08/21/2007
最終更新日 05/14/2014
ステータス アーカイブ
タイプ 一般