We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 7794

FPGA Editor 2.1i CS2 - Selecting a Path in the List window does not select the path in the Array window.


Keywords: FPGA, Editor, path, from, to, list

Urgency: Standard

General Description:
When I select a path under "PATHS" in the List Window, nothing is selected in the Array (main) window.


FPGA_Editor analyzes all of the constraints in the PCF, including TIGs. If the selected path has a TIG associated with it in the PCF, and none of the paths specified by the TIG are covered for timing analysis. Consequently, no paths are displayed in the Array Window.

Also, if the path only has BELs (Basic Elements), and no comps, macro instances, or nets in it, then nothing is displayed when it is selected from the list.
AR# 7794
日付 07/09/2001
ステータス アーカイブ
タイプ 一般