UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 8017

Synopsys Compiler, NGDBuild: A port list construct was found in .... EDIF file, this is not supported. Try enabling bus expansion.

説明

Keywords: Synopsys, Design, FPGA, Compiler, NGDBUILD, EDIF, .synopsys_dc.setup

Urgency: Standard

General Description:
When translating an EDIF netlist from Syonpsys Design Compiler, NGDBuild can give the
following error:

"A port list construct was found in .... in EDIF file, this is not supported.
Try enabling bus expansion"

ソリューション

Make sure that the following parameter is set in your .synopsys_setup file:

edifout_no_array = true

This is set in the templates provided in $XILINX/synopsys/examples:
template.synopsys_dc.setup_dc for Design Compiler and XC4000/Spartan series devices
template.synopsys_dc.setup_virtex for Design or FPGA Compiler and Virtex series devices.
AR# 8017
作成日 11/08/1999
最終更新日 06/13/2002
ステータス アーカイブ
タイプ 一般