AR# 8650: 3.1i COREGEN USER GUIDE - "SETPROJECT" command does not work in an XCO file
3.1i COREGEN USER GUIDE - "SETPROJECT" command does not work in an XCO file
Keywords: core generator, command file, project
General Description: The SETPROJECT command currently cannot be used within an XCO file to specify the CORE Generator project in which you want to generate a core.
If you want to generate a core in a particular project directory using a pre-existing XCO file, you must set up that directory as a CORE Generator project directory beforehand from the CORE Generator GUI.
After the CORE Generator project has been set up in this manner, you can also nvoke the CORE Generator in command line mode with a -p <project_directory> option to point to the CORE Generator project.