UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 881

Specifying an FDCE in VIEWsynthesis

説明

There are two ways to specify a register with Clock Enable line.

ソリューション

1

Instantiation:

FDCE has a hidden pin ("GSR" for the xc4000 and "GR" for the
xc3000 and xc5200) which needs to be listed in the component
definition.

Example for a xc4000 device:

library synth;
use synth.stdsynth.all;

entity sw7_gsr is
port (CLK: in STD_LOGIC;
CLKE: in STD_LOGIC;
CLEAR: in STD_LOGIC;
SW: in STD_LOGIC;
SWI: out STD_LOGIC);
end sw7_gsr;

architecture rtl of sw7_gsr is

component FDCE
port (CLR: in STD_LOGIC;
CE: in STD_LOGIC;
D : in STD_LOGIC;
C : in STD_LOGIC;
GSR: in STD_LOGIC; -- sneaky --
Q : out STD_LOGIC);
end component;

begin
fdcein: FDCE port map (CLEAR, CLKE, SW, CLK, '0', SWI);

end rtl;

2

Behavioral description using Clock Enable with
AsynchronousReset

LIBRARY ieee;
USE ieee.std_logic_1164.all;

Entity sync IS

PORT(din, clk, clke, reset : IN std_logic;
dout : OUT std_logic);
END;

ARCHITECTURE behav OF sync IS
BEGIN
PROCESS
BEGIN
WAIT UNTIL (prising(clk) OR reset = '1');
IF reset='1' THEN
dout <='1';
ELSE
IF clke ='1' THEN
dout <= din;
END IF;
END IF;
END PROCESS;
END behav;
AR# 881
作成日 03/06/1996
最終更新日 11/08/2004
ステータス アーカイブ
タイプ 一般