General Description: During the install of Service Pack 6 on a Windows NT platform, the following error is encountered:
"Installation Failed Setup failed while processing the FileCopier.SrvcPackReplacetask. The reported error was Problems when writing d:\fndtn\viewlog\data\logiblox\standard\logiblox.vs. Press OK to clean up partially-installed software."
ソリューション
1
This error occurs because Viewlogic is installed on the same machine as Foundation. To avoid it, delete these 3 files
logiblox.vs viewblock.vs viewdraw.vs
from the above directory, and the install of the service pack should complete successfully.
2
There should be at least 300MB of temp disk space. To check this:
1. Open a DOS window. 2. Type "echo %TEMP%". 3. What drive is TEMP on? If that drive doesn't have at least 300MB of space, change the location of TEMP. To do this, you must either run "sysedit" from Start -> Run.. (Windows 95, 98) or go to Control Panel -> System -> Environment (Windows NT, 2000).