UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 9288

LogiCORE FFTs - Which outputs should be connected to the FFT during a write operation to RAM X (TMS configuration)?

説明

Keywords: FFT, 1024, 256, 64, point, pt, connections, RAM, TMS

The "BANK" signal on the 64-, 256-, and 1024-point FFTs controls the swapping between the first two memory banks (RAM X and RAM Y) for the TMS configuration. Which RAM's outputs (DOB(15:0)_imag,DOB(15:0)_real) should be connected to the FFT when the host is performing a write operation to RAM X?

ソリューション

The DOB outputs of RAM Y should be connected to the FFT core inputs when a write operation is being performed on RAM X. The host has exclusive access to RAM X during this time.
AR# 9288
作成日 08/21/2007
最終更新日 09/10/2008
ステータス アーカイブ
タイプ 一般