UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 9760

3.1i NGDBuild - ERROR:Parsers:47 - basprcf.dfa not found

説明

Keywords: ngdbuild, error, parsers, 47, basprcf.dfa, not, found

Urgency: Standard

General Description:
When running the 3.1i implementation tools, the following error occurs
during the Translate step:

" Ngdbuild - ERROR:Parsers:47 - basprcf.dfa not found. "

ソリューション

This has been seen when both 2.1i and 3.1i are installed on the same
machine. This setup is fine, provided that the XILINX variable points
to the correct installation. However, if the path to the 2.1i installation
appears before that of the 3.1i installation in the PATH variable, this
error (or perhaps a similar error) may occur.

A workaround for this is to use %XILINX% in the PATH variable rather
than two explicit paths to the two different installations.

For example, the path to the Xilinx installation in the PATH variable
should look like this:

%XILINX%\bin\nt;
AR# 9760
作成日 07/20/2000
最終更新日 12/07/2004
ステータス アーカイブ
タイプ 一般