• Image Zoom
    PYNQ-Z2

AUP PYNQ-Z2

by: TUL

PYNQ is an open-source project from AMD that makes it easier to use AMD platforms. Using the Python language and libraries, designers can exploit the benefits of programmable logic and micro-processors to build more capable and exciting electronic systems.

  • Price: $129.00

Purchase from our partner: TUL


What's included

  • The PYNQ-Z2 board featuring the ZYNQ XC7Z020-1CLG400C SoC

Additional Required Items

  • The pynq image and 8 GB SD Card
  • Micro-USB cable 
  • Ethernet cable 

Contact AMD University Program with any questions.

  • Specifications

    FPGA
    • Zynq-7000 SoC XC7Z020-1CLG400C
    I/O Interfaces
    • USB-JTAG Programming circuitry
    • USB OTG 2.0
    • USB-UART bridge
    • One 10/100/1G Ethernet
    • HDMI Input
    • HDMI Output
    • I2S interface with 24bit DAC with 3.5mm TRRS jack
    • Line-in with 3.5mm jack
    Memory
    • 512 Mbyte DDR3 with 16-bit bus @ 1050 Mbps
    • 128 Mbit Quad-SPI Flash
    • Micro SD card connector
    Switches and LEDs
    • 2 Slide switches 
    • 2 RGB LEDs 
    • 4 LEDs
    • 4 Push-buttons 
    Clocks
    • One 125 MHz for PL
    • One 50 MHz for PS
    Expansion ports
    • 2 Pmod ports
      • 16 Total FPGA I/O (8 shared pins with Raspberry Pi connector)
    • 1 Arduino Shield connector
      • 24 Total FPGA I/O
      • 6 Single-ended 0-3.3V Analog inputs to XADC
    • Raspberry Pi connector
      • 28 Total FPGA I/O (8 shared pins with Pmod A port)
    Power Monitoring
    • Active monitoring of power supply currents and voltages