10 Gigabit Ethernet MAC Offerings and Software Requirements

Hardware Evaluation Time Out Period * : ~ 8 hrs

SOFTWARE Requirements Table

LogiCORE™ Version AXI4 Support Software Support Supported Device Families
10 Gigabit Ethernet MAC v15.1 AXI4-Stream
Vivado™ 2018.2 Kintex™ UltraScale™
Virtex™ UltraScale
Zynq™ 7000
Artix™ 7
Kintex 7
Virtex 7 / XT / -2L
10 Gigabit Ethernet MAC v11.6 AXI4-Stream
ISE™ 14.5 Zynq 7000 (7z030 and 7z045 only)
Artix 7
Kintex 7
Virtex 7 / XT / HT / -2L
Virtex 6 CXT / LXT / SXT / HXT / -1L
Spartan™ 6 LX / LXT
10 Gigabit Ethernet MAC v10.2   ISE 13.1 Virtex 6 CXT / LXT / SXT / HXT / -1L
Virtex 5 TXT / FXT / SXT / LXT
Virtex 5 LX
Virtex 4 FX / SX / LX
Spartan 6 LX / LXT
10 Gigabit Ethernet MAC v8.6   ISE 10.1 SP 3

ISE IP Update 10.1.3

Virtex II Pro

Download the required software from the AMD Downloads page. For information on New Features, Known Issues, and Patches please refer to the Licensing Solution Center.

* A Hardware Evaluation license for any of the IP cores above will enable you to parameterize, generate and instantiate these cores in your design. You will also be able to perform functional and timing simulation and generate a bitstream that you can use to download and configure your design in hardware.

The IP cores in this table will be fully functional in the programmed device for certain amount of time. After this time, the IP will "time out" (cease to function) and you will need to download and configure the FPGA again.