Viterbi Decoder Offerings and System Requirements

Hardware Evaluation Time Out Period * : ~ 2-3 hrs

SOFTWARE Requirements Table

LogiCORE™ Version AXI Support Software Support Supported Device Families
Viterbi Decoder v9.1 AXI4-Stream Vivado™ 2021.1 Kintex™ UltraScale+™
Virtex™ UltraScale+
Zynq™ UltraScale+
Kintex UltraScale™
Versal™ adaptive SoC
Virtex UltraScale
Zynq 7000
Artix™ 7
Kintex 7 / -2L
Virtex 7 / XT / HT
Viterbi Decoder v8.0 AXI4-Stream ISE™ 14.4 Artix 7
Kintex 7 / -2L
Virtex 7 / -2L / XT
Virtex 6 CXT / HXT / LXT / SXT
Spartan™ 6 LX / LXT
Viterbi Decoder v7.0 Legacy ISE 14.1 Artix 7
Kintex 7 / -2L
Virtex 7 / -2L / XT
Virtex 6 CXT / HXT / LXT / SXT
Virtex-5 FXT / SXT / LXT
Virtex-5 LX
Virtex-4 FX / SX / LX
Spartan-6 LX / LXT
Spartan-3A DSP
Spartan-3

Download the required software from the AMD Downloads page. For information on New Features, Known Issues, and Patches please refer to the Licensing Solution Center.

* A Hardware Evaluation license for any of the IP cores above will enable you to parameterize, generate and instantiate these cores in your design. You will also be able to perform functional and timing simulation and generate a bitstream that you can use to download and configure your design in hardware.

The IP cores in this table will be fully functional in the programmed device for certain amount of time. After this time, the IP will "time out" (cease to function) and you will need to download and configure the FPGA again.